Technical Support

The performance of any diamond core bit depends heavily on the use of proper drilling techniques. Although drilling conditions and materials may vary, following specific guidelines and safety precautions ensures safe, faster drilling speed and longer bit life.

IMPORTANT:

Always wear proper safety equipment; wear safety glasses, safety footware, snugg-fitting clothing, hearing and head protection, and respiratory equipment where required.

Core Drilling Techniques

1.Secure the core drill to the work surface so that there is no movement in the drill that would allow the bit to bind in the hole.

2.Use a sufficient supply of water to ensure that hole is constantly being flushed of abrasive cuttings.

3.Slowly lower the bit into the cut so that there is no skidding or lateral movement of the drill bit. The entire circumference of the core bit should penetrate the drilling surface before additional pressure is applied to the handle.

4.Exert steady downward pressure on the bit while drilling. Do not force the bit into the material.

5.Do not stop the flow of water or the rotation of the bit as long as the bit is in the hole.

6.If the drilling rate decreases noticeably, check the core bit. The slower penetration rate generally means that the bit is dull and needs to be reconditioned.

Core Drill Safety Precautions

1.In most cases, core drilling requires the use of water. Properly ground the core drill, as the use of any electrical tools in wet areas can be hazardous.

2.The three-pronged plug on the power cord of the motor or the extension cord must be plugged into a grounded electrical outlet of the appropriate voltage.

3.The core drill must be securely fastened to the intended work surface (wall, deck, etc.), using anchor bolts, vacuum pad or jack screw.

4.Use extreme caution when drilling through floors. Check for electrical conduit.

5.Provide protection for all personnel and materials below the areas being drilled.